Has anyone tried using a PWN Spindle on a Stepcraft M series machine?
I’m not aware of any personally, but we have an adapter plate for a stepcraft.
https://support.pwncnc.com/kb/article/292-spindle-mount/
It’s not a tested and documented platform, and this would serve as a guide
https://support.pwncnc.com/kb/article/115-other-pwm-controllers/
1 Like
Thanks, Chris!
It looks like this should work, theoretically.
I’m not worried about the spindle having an interface with the machine, as it looks like I can control the spindle independently.
Correct, just flip the switch into manual mode, hit the run button and let the bit fly
1 Like