# Which Post Processor would be needed for CAM

**URL:** <https://forum.pwncnc.com/t/which-post-processor-would-be-needed-for-cam/3529>\
**Category:** General\
**Created:** [September 25, 2025, 8:02pm UTC](https://forum.pwncnc.com/t/which-post-processor-would-be-needed-for-cam/3529 "2025-09-25T20:02:26Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![AkaMrBill](https://avatars.discourse-cdn.com/v4/letter/a/bcef8e/32.png) [@AkaMrBill](https://forum.pwncnc.com/u/AkaMrBill)\
**Post date:** [September 25, 2025, 8:02pm UTC](https://forum.pwncnc.com/t/which-post-processor-would-be-needed-for-cam/3529/1 "2025-09-25T20:02:26Z")

</div>

We will be using the Dominator Pro with Onshape. Onshape will be providing us with CAM Studio to do our CAM work. With that process, we will need to tell it what Post Processor to use. So which one should we either select, or ask Onshape to add to their suite?

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [September 25, 2025, 8:24pm UTC](https://forum.pwncnc.com/t/which-post-processor-would-be-needed-for-cam/3529/2 "2025-09-25T20:24:29Z")

</div>

I’m not familiar with that CAD software. Is there a Masso selection, because that would be the one you would use?

---

<div class="post-metadata">

**Author:** ![AkaMrBill](https://avatars.discourse-cdn.com/v4/letter/a/bcef8e/32.png) [@AkaMrBill](https://forum.pwncnc.com/u/AkaMrBill)\
**Post date:** [September 26, 2025, 3:36pm UTC](https://forum.pwncnc.com/t/which-post-processor-would-be-needed-for-cam/3529/3 "2025-09-26T15:36:02Z")

</div>

While I am still digging into this question….

I found this current list of supported Post Processors in Onshape CAM Studio:

> [@kitare102](#):
>
> Generic
> 
> - 3-Axis Generic Milling - APT CL
> - 3-Axis Generic Milling - Fanuc
> - 3-Axis Generic Milling - GRBL
> - 3-Axis Generic Milling - Haas NGC
> - 3-Axis Generic Milling - Heidenhain
> - 3-Axis Generic Milling - Hurco Winmax
> - 3-Axis Generic Milling - Mach4
> - 3-Axis Generic Milling - Mazak Mazatrol
> - 3-Axis Generic Milling - Okuma
> - 3-Axis Generic Milling - Siemens
> - 3-Axis Generic Milling - Tormach PathPilot
> 
> Bantam Tools
> 
> - Bantam Explorer TinyG
> 
> Brother
> 
> - Brother S700X1 CNC
> 
> Haas
> 
> - Haas DT-1 pre-NGC
> - Haas Mini Mill NGC
> - Haas Mini Mill 2 NGC
> - Haas Super Mini Mill NGC
> - Haas Super Mini Mill 2 NGC
> - Haas VF-1 NGC
> - Haas VF-2 NGC
> - Haas VF-2YT NGC
> - Haas VF-3 NGC
> - Haas VF-4 NGC
> - Haas VF-5 NGC
> - Haas VF-6 NGC
> - Haas VF-7 NGC
> - Haas VF-8 NGC
> - Haas VF-9 NGC
> - Haas VF-10 NGC
> - Haas VF-11 NGC
> - Haas VF-12 NGC
> - Haas VF-14 NGC
> - Haas VM-2 NGC
> - Haas VM-3 NGC
> - Haas VM-6 NGC
> 
> Hurco
> 
> - Hurco VM10i Winmax
> - Hurco VM20i Winmax
> 
> Inventables
> 
> - Inventables X-Carve GRBL
> 
> ShopBot
> 
> - ShotBot Desktop MAX SB3
> 
> STEPCRAFT
> 
> - STEPCRAFT M.1000 UCCNC
> - STEPCRAFT M.1000 WinPC-NC
> 
> Thermwood
> 
> - Thermwood CS45\_5x10ft SuperControl
> 
> Tormach
> 
> - Tormach 770M PathPilot
> - Tormach 770MX PathPilot
> - Tormach 1100M PathPilot

Do any of these look valid for use with the Masso controller?

Note that customizations is fully supported.

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [September 26, 2025, 4:04pm UTC](https://forum.pwncnc.com/t/which-post-processor-would-be-needed-for-cam/3529/4 "2025-09-26T16:04:09Z")

</div>

Stepcraft uccnc looks like it could be close.  
Grbl is the only other one I’ve had hands on experience with but masso doesn’t use grbl