# What is the measurement in this pic? **URL:** \ **Category:** Dominator CNC\ **Created:** [June 17, 2025, 5:33pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222 "2025-06-17T17:33:39Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![JoeW](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JoeW](https://forum.pwncnc.com/u/JoeW)\ **Post date:** [June 17, 2025, 5:33pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/1 "2025-06-17T17:33:39Z")
I need to know what the maximum width of a spoil board I can put on the dominator. Also what is the maximum width that I can surface with a 2" Bit? The width is something I need to know so I can plan attaching my AirWeights Slat system. Pic Attached Also what is the overall machining boundary of the dominator? Thanks ![Disc Pic](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/4/48b4ea2b228f0c3f885047bf363a5194f711ad5c.jpeg) ---
**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\ **Post date:** [June 17, 2025, 7:25pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/2 "2025-06-17T19:25:09Z")
Have you seen this… it answers most of your questions… [Dimensions](https://support.pwncnc.com/kb/article/544-dimensions/) Looks to me like 58.76" and maybe 53.71" are your numbers ---
**Author:** ![JoeW](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JoeW](https://forum.pwncnc.com/u/JoeW)\ **Post date:** [June 17, 2025, 8:37pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/3 "2025-06-17T20:37:34Z")
@Chris. Thank you Chris. I have seen those measurements. But I need to know that I can attach the slats to a spoil board that has been surfaced first. The slat layout is 49" wide and I need an additional .8" on each side to attach T-track. So 50 5/8" min. This is because I plan to have AirWeights cut and mill special 1/4 inch parts to go under the slats so I can attach them from underneath. The slat cannot be attached from above. I hope this makes sense. Since I have not received my machine yet, I cannot measure this myself and I was hoping PwnCNC could confirm that these measurement are doable after they assemble their fully functional Dominator. To have these parts made will be expensive and I do not want to have it done if they will not work. Thanks Joe ![Slats Width Measurement](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/1/152f8c4a83c436eb54b995c599c4783f1735873d.png) ---
**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\ **Post date:** [June 17, 2025, 8:49pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/4 "2025-06-17T20:49:35Z")
I can say this, it was (originally) designed to do a half sheet of plywood with clamps and room for tool holders on a side and/or back. ---
**Author:** ![JoeW](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JoeW](https://forum.pwncnc.com/u/JoeW)\ **Post date:** [June 17, 2025, 9:03pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/5 "2025-06-17T21:03:21Z")
@Chris. Thank You Chris. That makes total sense to me now. So with those dimensions I feel pretty confident they will work. ---
**Author:** ![Daniel](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/daniel/32/65_2.png) [@Daniel](https://forum.pwncnc.com/u/Daniel)\ **Post date:** [June 18, 2025, 2:07pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/6 "2025-06-18T14:07:32Z")
The plywood in the photo is 50" wide and 48" deep. The machine itself has a 2" front overhang which allows for “edge” jigs of various styles as well as tool-storage. ---
**Author:** ![JoeW](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JoeW](https://forum.pwncnc.com/u/JoeW)\ **Post date:** [June 18, 2025, 2:28pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/7 "2025-06-18T14:28:35Z")
@Daniel. Thank You Daniel. Is it possible to mount 50 5/8 inch width spoil board or will that interfere with movement? The setup I ordered is just like in this picture. ---
**Author:** ![Daniel](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/daniel/32/65_2.png) [@Daniel](https://forum.pwncnc.com/u/Daniel)\ **Post date:** [June 18, 2025, 3:48pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/8 "2025-06-18T15:48:27Z")
Absolutely it is… ![image](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/6/615acb234c28307dddb37367332598cce22d66d5.png) We have a gantry upgrade which is currently included with all machine orders. The inside distance between them is 54.108"… thus anything smaller then that will work just fine. ---
**Author:** ![JoeW](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JoeW](https://forum.pwncnc.com/u/JoeW)\ **Post date:** [June 18, 2025, 4:14pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/9 "2025-06-18T16:14:33Z")
@Daniel. That should do it with room to spare. Thank you for your help. ---
**Author:** ![JoeW](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JoeW](https://forum.pwncnc.com/u/JoeW)\ **Post date:** [June 26, 2025, 5:26pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/10 "2025-06-26T17:26:59Z")
It would be helpful to know the measurements marked in the attached photo. If they are known, could you please provide them? Thank You ![Measure Stand1](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/1/1f95855f3d29d0f5d25a421caa035ed51ac25655.png) . ---
**Author:** ![Daniel](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/daniel/32/65_2.png) [@Daniel](https://forum.pwncnc.com/u/Daniel)\ **Post date:** [June 26, 2025, 6:15pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/11 "2025-06-26T18:15:04Z")
Hope this helps… A=54.25" B=47.4" ---
**Author:** ![JoeW](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JoeW](https://forum.pwncnc.com/u/JoeW)\ **Post date:** [June 26, 2025, 7:15pm UTC](https://forum.pwncnc.com/t/what-is-the-measurement-in-this-pic/3222/12 "2025-06-26T19:15:20Z")
@Daniel. Yes it does Thank You.