# STL/STEP files for enclosures and touch?

**URL:** <https://forum.pwncnc.com/t/stl-step-files-for-enclosures-and-touch/3097>\
**Category:** Assembly Assistance\
**Created:** [May 12, 2025, 3:00pm UTC](https://forum.pwncnc.com/t/stl-step-files-for-enclosures-and-touch/3097 "2025-05-12T15:00:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Arnwoody](https://avatars.discourse-cdn.com/v4/letter/a/ba8739/32.png) [@Arnwoody](https://forum.pwncnc.com/u/Arnwoody)\
**Post date:** [May 12, 2025, 3:00pm UTC](https://forum.pwncnc.com/t/stl-step-files-for-enclosures-and-touch/3097/1 "2025-05-12T15:00:58Z")

</div>

Call me OCD, but I’d like to create a wiring diagram for my setup. Can PWN share 3D files assuming you have them. VFD, PE, Conversion kit and Masso touch. I will share back what I create. I think this will help me think through my layout.

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [May 12, 2025, 5:38pm UTC](https://forum.pwncnc.com/t/stl-step-files-for-enclosures-and-touch/3097/2 "2025-05-12T17:38:50Z")

</div>

There’s an ATC wiring diagram here

> **[ATC Overall Diagram and Unboxing - PwnCNC](https://support.pwncnc.com/kb/article/429-atc-overall-diagram/)**

There’s a dimensional drawing of the vfd here

> **[Measurements Drawing - PwnCNC](https://support.pwncnc.com/kb/article/106-measurements-drawing/)**

The pe is the same size, but pe information can be found here

> **[Pneumatics Enclosure (PE) - PwnCNC](https://support.pwncnc.com/kb/article/448-pneumatics-enclosure-pe/)**

The g3 touchs dimension can be found on their website

That’s all I can provide