# Shop brush maker edition

**URL:** <https://forum.pwncnc.com/t/shop-brush-maker-edition/3457>\
**Category:** General\
**Created:** [August 18, 2025, 3:18am UTC](https://forum.pwncnc.com/t/shop-brush-maker-edition/3457 "2025-08-18T03:18:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rizzo](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/rizzo/32/660_2.png) [@Rizzo](https://forum.pwncnc.com/u/Rizzo)\
**Post date:** [August 18, 2025, 3:18am UTC](https://forum.pwncnc.com/t/shop-brush-maker-edition/3457/1 "2025-08-18T03:18:13Z")

</div>

I love this little [brush](https://pwncnc.com/products/shop-brush-for-makers?_pos=2&_sid=318528e3a&_ss=r). I printed and deployed them across my shop to have always close by. Super handy to brush off tools after/between uses. I think I’m going to order longer bristles specially for the one on my table saw, to be able to to get down between the front rail. The parts nest really nicely on a build plate so it was fast to knock them out with the Bambu.

 ![IMG_3141](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/4/4077edf47a4331226b58d003174eec69a397ec5b.jpeg)

 ![IMG_3142](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/5/576404ff385d422d4339d53e1c42731925d0201f.jpeg)

 ![IMG_3143](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/b/b1372db918d3334d985993d99cc308d9375d7fb6.jpeg)

 ![IMG_3144](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/e/e693b22dbbe40154e60baaf993c89cc2346edb05.jpeg)

 ![IMG_3139](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/1/14f01571ede618c95b138d19b1e0f9cd95a19b83.jpeg)

---

<div class="post-metadata">

**Author:** ![fostinoguitars](https://avatars.discourse-cdn.com/v4/letter/f/8baadc/32.png) [@fostinoguitars](https://forum.pwncnc.com/u/fostinoguitars)\
**Post date:** [August 18, 2025, 5:15am UTC](https://forum.pwncnc.com/t/shop-brush-maker-edition/3457/2 "2025-08-18T05:15:10Z")

</div>

Where did you order the bristles?

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [August 18, 2025, 6:20am UTC](https://forum.pwncnc.com/t/shop-brush-maker-edition/3457/3 "2025-08-18T06:20:38Z")

</div>

> **[Brush Material (By the linear inch)](https://pwncnc.com/products/brush-material-by-the-linear-inch?_pos=1&_psq=Brush&_ss=e&_v=1.0)**
>
> Replacement Brush Material – Sold by the Inch Need replacement brush material for your dust boot or other brush-based accessories? You’re in the right place! This listing is sold by the linear inch, so be sure to order the correct length for your...