# Shapeoko 5 pro masso conversion

**URL:** <https://forum.pwncnc.com/t/shapeoko-5-pro-masso-conversion/3339>\
**Category:** General\
**Created:** [July 27, 2025, 9:24pm UTC](https://forum.pwncnc.com/t/shapeoko-5-pro-masso-conversion/3339 "2025-07-27T21:24:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fostinoguitars](https://avatars.discourse-cdn.com/v4/letter/f/8baadc/32.png) [@fostinoguitars](https://forum.pwncnc.com/u/fostinoguitars)\
**Post date:** [July 27, 2025, 9:24pm UTC](https://forum.pwncnc.com/t/shapeoko-5-pro-masso-conversion/3339/1 "2025-07-27T21:24:55Z")

</div>

Has anyone done the PWNCnc. Masso conversion to a Shapeoko 5 Pro? Im thinking about it.

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [July 27, 2025, 10:34pm UTC](https://forum.pwncnc.com/t/shapeoko-5-pro-masso-conversion/3339/2 "2025-07-27T22:34:39Z")

</div>

> [@Conversion Kit Install Time](https://forum.pwncnc.com/t/conversion-kit-install-time/2884):
>
> I recently picked up the Masso conversion kit for my Shapeoko 5 Pro and I’m curious if anyone has installed this yet and, if so, how long did the process take? I’ve got a few projects I’m working on, but I’d prefer to retire the laptop that’s running my CNC sooner rather than later (1/3 of the keys don’t work due to an MDF dust incident).

Here’s one person’s experience

---

<div class="post-metadata">

**Author:** ![Pauliep](https://avatars.discourse-cdn.com/v4/letter/p/87869e/32.png) [@Pauliep](https://forum.pwncnc.com/u/Pauliep)\
**Post date:** [July 28, 2025, 6:42am UTC](https://forum.pwncnc.com/t/shapeoko-5-pro-masso-conversion/3339/3 "2025-07-28T06:42:27Z")

</div>

That is a great write up on the process.

I also submitted here: [Shapeoko 5 Pro 4x4 Masso retrofit](https://forum.pwncnc.com/t/shapeoko-5-pro-4x4-masso-retrofit/3162)