# Recommended glue for Dust Boot v12?
**URL:** https://forum.pwncnc.com/t/recommended-glue-for-dust-boot-v12/3610
**Category:** General
**Created:** [December 17, 2025, 2:02pm UTC](https://forum.pwncnc.com/t/recommended-glue-for-dust-boot-v12/3610 "2025-12-17T14:02:34Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@Dudgeon](https://forum.pwncnc.com/u/Dudgeon)
#### Post date: [December 17, 2025, 2:02pm UTC](https://forum.pwncnc.com/t/recommended-glue-for-dust-boot-v12/3610/1 "2025-12-17T14:02:34Z")
Just took delivery of the Dust Boot v12 – looks like there is some assembly required, with very loose fit between parts, e.g. the maglock \<\> hose adapter, the maglock \<\> boot.
I don’t know what material these parts are printed from, and I need to figure out what kind of gap-filling adhesive to use that is strong but not brittle (gaps are way too big for CA glue).
Does anyone here have experience glueing these parts together? Is there a different approach (not glue) that works better? Unfortunately the boot did not ship with any documentation and I can’t find any info online, in the forums, etc.
---
### Author:  [@fostinoguitars](https://forum.pwncnc.com/u/fostinoguitars)
#### Post date: [December 27, 2025, 4:18pm UTC](https://forum.pwncnc.com/t/recommended-glue-for-dust-boot-v12/3610/2 "2025-12-27T16:18:51Z")
If pwncnc hasn’t responded to a post in 10 days, this is one of the reasons I probably won’t be purchasing a Pwn Cnc machine. Pwn seems like they’re spread way too thin. Seems like an ongoing thing.
---
### Author:  [@Dudgeon](https://forum.pwncnc.com/u/Dudgeon)
#### Post date: [December 27, 2025, 6:08pm UTC](https://forum.pwncnc.com/t/recommended-glue-for-dust-boot-v12/3610/3 "2025-12-27T18:08:17Z")
Well fwiw I ended up going with a plastic-oriented jb weld; looks/feels strong enough.
---
### Author:  [@Chris](https://forum.pwncnc.com/u/Chris)
#### Post date: [December 27, 2025, 11:11pm UTC](https://forum.pwncnc.com/t/recommended-glue-for-dust-boot-v12/3610/4 "2025-12-27T23:11:10Z")
The forum is **not** a place of official support, official support is only provided from the email [support@pwncnc.com](mailto:support@pwncnc.com)
I’m a volunteer (who happens to be a former employee), and didn’t have an answer (because i dont have all the answers) which is why i didn’t say anything.
This is place for community effort.