# PWN Spindle on Stepcraft M1000
**URL:** https://forum.pwncnc.com/t/pwn-spindle-on-stepcraft-m1000/1469
**Category:** Spindles and ATCs
**Created:** [May 22, 2024, 12:14pm UTC](https://forum.pwncnc.com/t/pwn-spindle-on-stepcraft-m1000/1469 "2024-05-22T12:14:24Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@DeLo](https://forum.pwncnc.com/u/DeLo)
#### Post date: [May 22, 2024, 12:14pm UTC](https://forum.pwncnc.com/t/pwn-spindle-on-stepcraft-m1000/1469/1 "2024-05-22T12:14:24Z")
Has anyone tried using a PWN Spindle on a Stepcraft M series machine?
---
### Author:  [@Chris](https://forum.pwncnc.com/u/Chris)
#### Post date: [May 22, 2024, 5:14pm UTC](https://forum.pwncnc.com/t/pwn-spindle-on-stepcraft-m1000/1469/2 "2024-05-22T17:14:40Z")
I’m not aware of any personally, but we have an adapter plate for a stepcraft.
[https://support.pwncnc.com/kb/article/292-spindle-mount/](https://support.pwncnc.com/kb/article/292-spindle-mount/)
It’s not a tested and documented platform, and this would serve as a guide
[https://support.pwncnc.com/kb/article/115-other-pwm-controllers/](https://support.pwncnc.com/kb/article/115-other-pwm-controllers/)
---
### Author:  [@DeLo](https://forum.pwncnc.com/u/DeLo)
#### Post date: [May 22, 2024, 7:37pm UTC](https://forum.pwncnc.com/t/pwn-spindle-on-stepcraft-m1000/1469/3 "2024-05-22T19:37:09Z")
Thanks, Chris!
It looks like this should work, theoretically.
I’m not worried about the spindle having an interface with the machine, as it looks like I can control the spindle independently.
---
### Author:  [@Chris](https://forum.pwncnc.com/u/Chris)
#### Post date: [May 22, 2024, 10:59pm UTC](https://forum.pwncnc.com/t/pwn-spindle-on-stepcraft-m1000/1469/4 "2024-05-22T22:59:58Z")
Correct, just flip the switch into manual mode, hit the run button and let the bit fly