# PWN spindle and Buildbotics controller **URL:** \ **Category:** General\ **Created:** [January 31, 2025, 2:00pm UTC](https://forum.pwncnc.com/t/pwn-spindle-and-buildbotics-controller/2621 "2025-01-31T14:00:41Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Eriz](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/eriz/32/540_2.png) [@Eriz](https://forum.pwncnc.com/u/Eriz)\ **Post date:** [January 31, 2025, 10:19pm UTC](https://forum.pwncnc.com/t/pwn-spindle-and-buildbotics-controller/2621/2 "2025-01-31T22:19:33Z")
The following topics may help you. “…Onefinity Renamed the PWNCNC profile to EM60…” > [@Onefinty BB controller firmware 1.6 w/rotary issue](https://forum.pwncnc.com/t/onefinty-bb-controller-firmware-1-6-w-rotary-issue/2599): > > Hello all, Just an FYI but the new 1.6 firmware from Onefinity Renamed the PWNCNC profile to EM60 - the reason? Because they have Redline now and i guess we get kicked to the curb. from Onefiinity support "The only spindle we officially support is: [https://www.onefinitycnc.com/shop/category/spindles](https://www.onefinitycnc.com/shop/category/spindles) All other spindles are considered aftermarket and we will not be able to provide technical support. Aftermarket spindles may void your warranty." Just an FYI… > [@Spindle Dead After 1F Upgrade](https://forum.pwncnc.com/t/spindle-dead-after-1f-upgrade/2613/2): > > Tried EM60 in the tool type field and the spindle started running immediately. Sorry for the false alarm. I was unaware of our tool type being EM60. --- _[View the full topic](https://forum.pwncnc.com/t/pwn-spindle-and-buildbotics-controller/2621)._