# Dominator Pro Leg Kit alternative

**URL:** <https://forum.pwncnc.com/t/dominator-pro-leg-kit-alternative/3521>\
**Category:** Dominator CNC\
**Created:** [September 18, 2025, 5:49pm UTC](https://forum.pwncnc.com/t/dominator-pro-leg-kit-alternative/3521 "2025-09-18T17:49:52Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![AkaMrBill](https://avatars.discourse-cdn.com/v4/letter/a/bcef8e/32.png) [@AkaMrBill](https://forum.pwncnc.com/u/AkaMrBill)\
**Post date:** [September 18, 2025, 5:49pm UTC](https://forum.pwncnc.com/t/dominator-pro-leg-kit-alternative/3521/1 "2025-09-18T17:49:53Z")

</div>

While the [Leg Kit](https://pwncnc.com/collections/machines/products/legs) appears quite sturdy, it is also expensive. At $2127.00 it places it outside our budget. We would love to build our own table and use the funds saved to help towards an ATC if possible.

So, here is the question. Is there a set of plans for a DIY table that works with the Dominator Pro? If not, what specific dimentions and features would a support for the D Pro require?

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [September 18, 2025, 10:58pm UTC](https://forum.pwncnc.com/t/dominator-pro-leg-kit-alternative/3521/2 "2025-09-18T22:58:54Z")

</div>

> [@AkaMrBill](#):
>
> So, here is the question. Is there a set of plans for a DIY table that works with the Dominator Pro?

In a word, there is not. Just a table would probably suffice.

> [@AkaMrBill](#):
>
> If not, what specific dimentions and features would a support for the D Pro require?

Dimensions with an example table size can be found here:  
[Dimensions - Dominator Pro](https://support.pwncnc.com/kb/article/544-dimensions-dominator-pro/)  
They is a PDF Attachment of the images, so you can print it out and scribble any ideas on dimensions ect.

You can use promo code CHRISS, it won’t work on ATC, but it will on the CNC.

---

<div class="post-metadata">

**Author:** ![AkaMrBill](https://avatars.discourse-cdn.com/v4/letter/a/bcef8e/32.png) [@AkaMrBill](https://forum.pwncnc.com/u/AkaMrBill)\
**Post date:** [September 19, 2025, 2:40pm UTC](https://forum.pwncnc.com/t/dominator-pro-leg-kit-alternative/3521/3 "2025-09-19T14:40:21Z")

</div>

Excellent, those provide just about all I need to design a table. 72”x72” will do the trick.

One last question. It looks like, from the drawings, that the end plates on the 4 corners are flush with the bottom of the cross bars for the bed. Is that correct, or is there any offset between them?

---

<div class="post-metadata">

**Author:** ![Daniel](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/daniel/32/65_2.png) [@Daniel](https://forum.pwncnc.com/u/Daniel)\
**Post date:** [September 20, 2025, 1:22am UTC](https://forum.pwncnc.com/t/dominator-pro-leg-kit-alternative/3521/5 "2025-09-20T01:22:44Z")

</div>

The Y plates are designed to be flush but only when you have the Bed Rigitidy upgrade.  
Otherwise, the primary “bed” frame of the machine it sits roughly 40mm above the surface if it were sitting on a flat surface.

Hope that makes sense.

 ![image](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/d/d0862b163a503d26a50ec42e6b902e0ab6ecf1b0.jpeg)

---

<div class="post-metadata">

**Author:** ![AkaMrBill](https://avatars.discourse-cdn.com/v4/letter/a/bcef8e/32.png) [@AkaMrBill](https://forum.pwncnc.com/u/AkaMrBill)\
**Post date:** [September 20, 2025, 1:38am UTC](https://forum.pwncnc.com/t/dominator-pro-leg-kit-alternative/3521/6 "2025-09-20T01:38:35Z")

</div>

Makes perfect sense. I’m glad we plan on buying the bed rigidity upgrade. 😁