# Any Using Standard Monitor Arm For Masso

**URL:** <https://forum.pwncnc.com/t/any-using-standard-monitor-arm-for-masso/2677>\
**Category:** General\
**Created:** [February 11, 2025, 7:28pm UTC](https://forum.pwncnc.com/t/any-using-standard-monitor-arm-for-masso/2677 "2025-02-11T19:28:47Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eriz](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/eriz/32/540_2.png) [@Eriz](https://forum.pwncnc.com/u/Eriz)\
**Post date:** [February 11, 2025, 7:28pm UTC](https://forum.pwncnc.com/t/any-using-standard-monitor-arm-for-masso/2677/1 "2025-02-11T19:28:47Z")

</div>

I’m considering using a standard VESA monitor mount for my Masso controller. The Masso follows the VESA 100 x 100 mm standard (M4 x 10 mm) for monitors \<30.8 lbs / \<14 kg. There are lots of cheap monitor mounts on Amazon. My hesitation is that I think I’ll move the Masso around a lot more than I would a desktop monitor, so I’ll want a mount that can easily and reliably be repositioned. Anyone have a recommendation for such a mount?

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [February 11, 2025, 7:32pm UTC](https://forum.pwncnc.com/t/any-using-standard-monitor-arm-for-masso/2677/2 "2025-02-11T19:32:17Z")

</div>

This is what I have.  
[Vesa Mount](https://www.amazon.com/dp/B0BJYN2WZ9?ref=ppx_yo2ov_dt_b_fed_asin_title)

Instead of grabbing onto a pole, I don’t use one of the parts, and screwed it directly into my table.  
Up Down, Left Right, Tilt Up Tilt Down. does all the positioning I want.

---

<div class="post-metadata">

**Author:** ![Eriz](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/eriz/32/540_2.png) [@Eriz](https://forum.pwncnc.com/u/Eriz)\
**Post date:** [February 11, 2025, 7:45pm UTC](https://forum.pwncnc.com/t/any-using-standard-monitor-arm-for-masso/2677/3 "2025-02-11T19:45:33Z")

</div>

Thanks for the recommendation @Chris

---

<div class="post-metadata">

**Author:** ![Daniel](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/daniel/32/65_2.png) [@Daniel](https://forum.pwncnc.com/u/Daniel)\
**Post date:** [February 12, 2025, 2:07pm UTC](https://forum.pwncnc.com/t/any-using-standard-monitor-arm-for-masso/2677/4 "2025-02-12T14:07:08Z")

</div>

I really like this one [Amazon.com: HUANUO Single Monitor Mount, Adjustable Monitor Arm Desk Mount Fits 13-32 inch Screen, Holds 19.8lb, Monitor Stand with 22.44inch Max Height, Full Motion Swivel Monitor Arm with Vesa Mount : Electronics](https://www.amazon.com/gp/product/B08FB7WFCT/)

Monoprice has a bunch of options as well: [https://www.monoprice.com/search/index?keyword=VESA](https://www.monoprice.com/search/index?keyword=VESA)

---

<div class="post-metadata">

**Author:** ![Aiph5u](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/aiph5u/32/727_2.png) [@Aiph5u](https://forum.pwncnc.com/u/Aiph5u)\
**Post date:** [February 12, 2025, 2:23pm UTC](https://forum.pwncnc.com/t/any-using-standard-monitor-arm-for-masso/2677/5 "2025-02-12T14:23:01Z")

</div>

Hey @Eriz, hey @Chris, hey Daniel,

I use the [Ergotron](https://www.ergotron.com/en-us/)’s [LX desk mount](https://www.ergotron.com/en-us/products/product-details/45-682#?color=white&buynow=0) ([datasheet](https://media.ergotron.com/reserved/resources/05-lx-pro-desk-monitor-arm-ea-orig.pdf)) on all my desktop monitors. It’s best quality, they are entirely made of aluminium. You can move the arm and the monitor will always stay where you positioned it. You can adjust the monitor’s weight and also the friction (see [manual](https://media.ergotron.com/reserved/resources/888-45-435-w-orig.pdf)). All the monitor cables can run inside the arm, I have one with both HDMI, DisplayPort, Power, and Sound cables, all inside the arm. The Masso may be too light in weight, since they are designed for desktop monitors. But they have a broad range of products.

---

<div class="post-metadata">

**Author:** ![Eriz](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/eriz/32/540_2.png) [@Eriz](https://forum.pwncnc.com/u/Eriz)\
**Post date:** [February 12, 2025, 10:57pm UTC](https://forum.pwncnc.com/t/any-using-standard-monitor-arm-for-masso/2677/6 "2025-02-12T22:57:54Z")

</div>

Thank you all for sharing your recommendations!

I decided to try to HUANUO ($38) and ordered a [PwnCNC Masso screen protector](https://pwncnc.com/products/masso-touch-screen-protector) to complete my setup.

I’ve used Ergotron’s products at work for nearly two decades, but they are too expensive for my home shop. Hopefully I don’t regret going with a lower price option.