# 3d printer helps a lot

**URL:** <https://forum.pwncnc.com/t/3d-printer-helps-a-lot/934>\
**Category:** Assembly Assistance\
**Created:** [March 12, 2024, 8:28pm UTC](https://forum.pwncnc.com/t/3d-printer-helps-a-lot/934 "2024-03-12T20:28:01Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mrd](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@Mrd](https://forum.pwncnc.com/u/Mrd)\
**Post date:** [March 12, 2024, 8:28pm UTC](https://forum.pwncnc.com/t/3d-printer-helps-a-lot/934/1 "2024-03-12T20:28:01Z")

</div>

If anyone ever told you…you didn’t need a 3d printer…well they didn’t need a part in a hurry.

 ![1000001366](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/1X/a27170a1722b151add1f76cddaae8cebeaa4e03d.jpeg)

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [March 13, 2024, 12:28am UTC](https://forum.pwncnc.com/t/3d-printer-helps-a-lot/934/2 "2024-03-13T00:28:31Z")

</div>

Another reason why we give away the design

---

<div class="post-metadata">

**Author:** ![Daniel](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/daniel/32/65_2.png) [@Daniel](https://forum.pwncnc.com/u/Daniel)\
**Post date:** [March 16, 2024, 1:18pm UTC](https://forum.pwncnc.com/t/3d-printer-helps-a-lot/934/3 "2024-03-16T13:18:42Z")

</div>

A 3d printer is my most recommended accessory for any maker shop!

---

<div class="post-metadata">

**Author:** ![CornerStoneWW](https://avatars.discourse-cdn.com/v4/letter/c/da6949/32.png) [@CornerStoneWW](https://forum.pwncnc.com/u/CornerStoneWW)\
**Post date:** [August 21, 2024, 3:29pm UTC](https://forum.pwncnc.com/t/3d-printer-helps-a-lot/934/4 "2024-08-21T15:29:19Z")

</div>

Where do I go to access your 3D Printed designs for dust boots etc?

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [August 21, 2024, 4:35pm UTC](https://forum.pwncnc.com/t/3d-printer-helps-a-lot/934/5 "2024-08-21T16:35:24Z")

</div>

Makers files / packs on the website. Files are the STL’s, and Packs are the Hardware needed to complete the design. Things like the maglock makers file doesn’t have a makers pack, but for maglock its just [magnets](https://pwncnc.myshopify.com/products/magnets?_pos=2&_psq=magnet&_ss=e&_v=1.0).

Heres a filtered selection of everything tagged for makers.  
[Makers Section](https://pwncnc.myshopify.com/collections/all?filter.p.tag=For+Makers)