# 1F Masso Monitor Arm

**URL:** <https://forum.pwncnc.com/t/1f-masso-monitor-arm/467>\
**Category:** General\
**Created:** [January 26, 2024, 7:03am UTC](https://forum.pwncnc.com/t/1f-masso-monitor-arm/467 "2024-01-26T07:03:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Oseanmc](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/oseanmc/32/661_2.png) [@Oseanmc](https://forum.pwncnc.com/u/Oseanmc)\
**Post date:** [January 26, 2024, 7:03am UTC](https://forum.pwncnc.com/t/1f-masso-monitor-arm/467/1 "2024-01-26T07:03:41Z")

</div>

I read or saw somewhere that Daniel or PWNCNC was designing an alternate Masso Controller/Monitor arm that articulates more than the stock version.  
Any traction on that yet?  
I have seen an extension from Dash but I’m definitely interested in the ability to move it away from the business end of my spindle!

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [January 26, 2024, 8:05am UTC](https://forum.pwncnc.com/t/1f-masso-monitor-arm/467/2 "2024-01-26T08:05:32Z")

</div>

Same but different and my take on the subject.

We are looking at rolling that and the boom soon.

> [@Moving X Axis homing location 1F Elite](https://forum.pwncnc.com/t/moving-x-axis-homing-location-1f-elite/137):
>
> This was the 2nd thing I did because I hated the boots hitting masso everytime I homed. What it took was a stretch of 22/3 wire and a male/female 3 pin micro molex connector, and a mechanism to move the limit switch pin. My neighbor just happens to be a metalworker and was kind enough to tap m3 screwholes where i needed them. The last part of the equation was playing with numbers so it went the full length without coming up short or hitting the y1 r…

---

<div class="post-metadata">

**Author:** ![MikeXYZ](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/mikexyz/32/1430_2.png) [@MikeXYZ](https://forum.pwncnc.com/u/MikeXYZ)\
**Post date:** [August 15, 2025, 12:44pm UTC](https://forum.pwncnc.com/t/1f-masso-monitor-arm/467/3 "2025-08-15T12:44:38Z")

</div>

Reviving an old thread with a solution to this problem for Onefinity users.

I created a super sturdy aluminum mount that moves the Masso Arm away from the machine to prevent collisions between the Masso screen and the spindle/dust collector/laser.

It has been very well received with a huge number of positive reviews.

Available on my [Etsy](https://www.etsy.com/ca/listing/4300994412/monitor-extension-mount-for-onefinity) page and [website](https://www.stingraydesignandmanufacturing.com/stingraycncsolutions/p/onefinity-masso-extension-mount).

 ![Stingray Onefinity Masso Touch Extension Mount-12](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/d/d617513418ac0e389e9db897a581216d5b5e1bc8.jpeg)

 ![20250514_134858](https://canada1.discourse-cdn.com/flex011/uploads/pwncnc/original/2X/d/d10fd5c574bb524ccb72e8afd828e101b0fd6c42.jpeg)

Designed to work on Onefinity Elite machines, but many have also installed them on the older Pro machines with the Buildbotics controller by removing some of the washers.