# 1.5kw 110volt NO POWER

**URL:** <https://forum.pwncnc.com/t/1-5kw-110volt-no-power/2276>\
**Category:** General\
**Created:** [November 7, 2024, 11:16pm UTC](https://forum.pwncnc.com/t/1-5kw-110volt-no-power/2276 "2024-11-07T23:16:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![GJM](https://avatars.discourse-cdn.com/v4/letter/g/edb3f5/32.png) [@GJM](https://forum.pwncnc.com/u/GJM)\
**Post date:** [November 7, 2024, 11:16pm UTC](https://forum.pwncnc.com/t/1-5kw-110volt-no-power/2276/1 "2024-11-07T23:16:00Z")

</div>

Just completed a MASSO upgrade from onefinity. Now my spindle stalls drilling a 1/4” hole 1/2” deep in MDF. The encoder pulses were reset to 0/ rev. I I reset the encoder to 100/rev but made no difference. Feed/Speed 2 IPM AT 15000rpm. Vfd in automatic.

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.pwncnc.com/chris/32/54_2.png) [@Chris](https://forum.pwncnc.com/u/Chris)\
**Post date:** [November 8, 2024, 10:36pm UTC](https://forum.pwncnc.com/t/1-5kw-110volt-no-power/2276/2 "2024-11-08T22:36:55Z")

</div>

Just for a public front, we’ve been working together via the only official support channel, [support@pwncnc.com](mailto:support@pwncnc.com)